TABLE CLOTH LAYING

• A tablecloth is a cloth used to cover a table. Some are mainly ornamental coverings, which may also help protect the table from scratches and stains. Other tablecloths are designed to be spread on a dining table before laying out tableware and food

• OPEN TABLE PROCEDURE 

1. TAKE THE TABLE 
2. PUT THE TABLE AT THE RIGHT PLACE 
3. OPEN THE LEGS TABLE SLOWLY
4. MAKE SURE MOVE THE TABLE AT THE RIGHT PLACE 

• FOLD THE TABLECLOTH PROCEDURE 

1. FIRSTLY , FOLD THE TABLECLOTH IT TO 2 , MAKE SURE THE OUTER LAYER AT OUTSIDE
2. THEN, FOLD IT AGAIN BUT AT THE OTHER SIDE . THE OUTSIDE LAYER MUST BE INSIDE .
3. PLACE IT ON THE TABLE NEATLY 
4. FOLD BOTH SIDE TO THE CENTER AND GIVE SOME SPACE AT THE CENTER 
5. LASTLY FOLD BOTH SIDE INTO A CENTER BACK 

• LAYING THE TABLECLOTH PROCEDURE 

1. PUT FOLDING TABLECLOTH EARLY THAT WE MAKE AT THE  CENTER TABLE 
2. THEN , OPEN THE TABLECLOTH CAREFULLY AND NEATLY 
3. TAKE THE TOP FLAP BETWEEN THE THUMB AND THE END THE FIRST FINGER WITH THE THUMB UPPER MOST AND THE CENTER FOLD BETWEEN THE FIRST AND SECOND FINGER 
4. LEAN ACROSS THE TABLE  AND RELEASE THE BOTTOM LAYER TO HANG OVER THE FAR EDGE OF THE TABLE 

• CHANGING TABLE PROCEDURE 

1. REMOVE ALL THE KUTLERIES , FLATWARE , GLASSWARE 
2. DO THE CRUMBING DOWN 
3. OPEN THE CLEAN TABLECLOTH BY HOLDING IT ACCORDING TO THE METHOD OF LAYING TABLECLOTH
4. AT THE SAME TIME PULL OUT THE SOILED CLOTH UNDERNEATH THE CLEAN ONE TO THE END . THE EDGE OF THE NEW TABLECLOTH SHOULD REPLACE THE POSITION OF THE SOILED TABLECLOTH
5. FOLD THE SOILED TABLECLOTH AND REMOVE IT